1. Input beam aperture: 10mm
2. Good degree of linearity, high resolution small drift, precise repetitive positioning.
3. High speed galvanometer scanning, stable performance small zero drift, strong anti-interference
4. Extensive application: Laser deflection and two-dimensional localization etc.
5. Other wavelengths can be chosen, 10.6um, 1064nm, 355nm, 532nm etc.
The CY-Cube10 Input Aperture High Speed 10mm Galvo Scanner Head has good running stability, high positioning accuracy, fast marking speed, strong anti-interference ability, the overall performance of the scanner has reached the international leading level in this field.
The advantages are as following:
■ Adopted the photoelectric sensors
■ Differential photoelectric sensor for accurate detection of motor rotor position, good linearity, lower drift, high resolution and repeat positioning.
■ Accurate load design for 10 mm beam aperture mirrors, high accuracy of the motor assembly, reasonable structure, very small static friction coefficient, and zero offsets, all ensured the best dynamic characteristics for the whole system.
■ Drives with advanced detection ability of position and speed greatly improved the dynamic response performance and scanning speed of the whole system.
■ Design of overload, over-current, and reverse connect protection, makes the system running more reliable.
■ The whole system adopted the optimization Designing of electromagnetic compatibility, with a high signal-to-noise ratio and strong anti-interference ability.
■ This galvanometer galvo scan system solved the common problems of motor temperature drift, signal interference, and zero drift, etc.
Model |
CY-Cube10 |
Maximum allowed average laser power | ≤100W |
Damage threshold for pulsed operation | 10J/CM² |
Aperture | 10mm |
Effective scan angle | ±15° |
Tracking error | ≤0.13ms |
Step response time (1% of full scale) | ≤0.20ms |
Speed |
|
Positioning / Jump | <20m/s |
Precision marking speed | <4.0m/s |
Good writing quality | 950 cps |
Precision |
|
Linearity | 0.999 |
Repeatability | 2μrad |
Temperature drift |
|
Over 8 hours long-term offset drift (after 30 min warm-up) | 25μrad |
Over 8 hours long-term gain drift (after 30 min warm-up) | 50μrad |
Operating Temperature Range | 25℃ ± 10℃ |
Signal interface | Analog: ± 10 V or ± 5 V |
Digital: XY 2 - 100 protocol | |
Input power requirement (DC) | ± 15 V @ 2A Max RMS |